Uneven routes
Map surface changes, gradients, mud, gravel and turning areas.
ZJ / RT SERIES
Catalogue-derived ZJ product visualisation. Final branding, rated capacity, engine, tyres and mast are confirmed with the quotation.
ROUGH-TERRAIN FORKLIFTS
ZJ RT80
The largest rough-terrain model direction in the supplied catalogue, pending confirmation of the current rated load.
DieselCounterbalance
The CPCD-80T page contains a rated-load value inconsistent with the model designation. Confirm the current technical sheet before quotation.
To confirmRated capacity
2000-7000 mm customizableLift / fork range
4000 mmTurning radius
Speak directly with ZJ · +86 181 0331 8125
01 / MODEL IN CONTEXT
Start with
the work.
The largest rough-terrain model direction in the supplied catalogue, pending confirmation of the current rated load. Use the values below as a comparison starting point and confirm the final supplied configuration with ZJ.
Discuss ZJ RT80Outdoor loading
Confirm load centre, lift height, visibility and attachment needs.
Terrain package
Review tyres, ground clearance, drive mode and stability requirements.
Destination spec
Confirm engine, emissions and documentation for the market.
02 / CHECK THE FIT
CATALOGUE VALUES / CONFIRM WITH QUOTATIONSix numbers.
One operating picture.
Read rated capacity together with load centre, lift height, fork dimensions and the space needed to manoeuvre.
03 / FULL SPECIFICATION
Every detail.
A clearer decision.
Choose a specification group to review the catalogue values for ZJ RT80. Confirm the final supplied configuration with your quotation.
The CPCD-80T page contains a rated-load value inconsistent with the model designation. Confirm the current technical sheet before quotation.
01
Capacity & dimensions
Size, load and manoeuvring data
| Rated capacity | Confirm current rated capacity |
|---|---|
| Maximum lift height | 2000-7000 mm customizable |
| Overall height | 2850 mm listed overall |
| Body length (without forks) | 4750 mm listed overall |
| Body width | 2200 mm listed overall |
| Turning radius | 4000 mm |
| Minimum ground clearance | 360 mm centre clearance |
| Mast tilt (front / rear) | 6 / 12° |
02
Power & equipment
Drive, energy and operating configuration
| Power source | Diesel |
|---|---|
| Drive mode | Full-time all-wheel drive |
| Engine direction | 6105 direction |
| Engine power | 92kW listed |
03
Source & verification
Catalogue identity and data traceability
| Original catalogue model | CPCD-80T |
|---|---|
| Catalogue reference | 2026 bilingual catalogue, page 20 |
Rated capacity depends on load centre, lift height and attachments. Engine, fuel system, emissions and destination requirements must be confirmed for the selected configuration.
MODEL GUIDE / ZJ RT80
A clearer rough-terrain forklift
buying decision.
Use these model-specific checks to decide whether ZJ RT80 belongs on the shortlist. The final machine must still be matched to the real load, route and destination.
Read the load correctly
The current rated capacity of ZJ RT80 requires confirmation. Use the model as a catalogue direction until ZJ supplies the current technical sheet and marked-capacity information.
Measure the complete route
Compare the 2200 mm listed overall body width and 4000 mm turning radius with the narrowest doorway, aisle and turning point on the route.
Confirm the operating system
Confirm the 6105 direction direction, emissions configuration, ventilation and documentation required for the destination market.
COMMON QUESTIONS
About ZJ RT80
Answers use the supplied catalogue values and identify where order-specific confirmation is still required.
Compare all rough-terrain forkliftsWhat is the rated capacity of ZJ RT80?
A reliable rated capacity for ZJ RT80 is not confirmed in the supplied source. Request the current technical sheet and confirm the marked capacity before selection.
What lift height is listed for ZJ RT80?
The catalogue lists 2000-7000 mm customizable. Confirm the mast type, lowered mast height, free lift and residual capacity required for the actual application.
How much working space does ZJ RT80 need?
The listed body width is 2200 mm listed overall and the turning radius is 4000 mm. Check these values with doors, aisles, right-angle stacking space and the complete travel route.
How do I request a quotation for this rough-terrain forklift?
Send the maximum load and dimensions, load centre, lift height, workplace, shift hours, attachment needs, quantity and destination. ZJ will confirm the current ZJ RT80 configuration before quotation.
04 / BUILD YOUR WORKING PACKAGE
Configure the lift.
Send one clear enquiry.
Choose the duty, energy direction, mast, running gear and attachments. Your choices become a structured WhatsApp enquiry for ZJ to verify.
The configurator prepares an enquiry, not a final engineering approval. ZJ will confirm capacity, load centre, stability, attachment compatibility, local compliance and availability before quotation.
SELECTION GUIDE / CONFIGURE AROUND YOUR WORK
The machine is only the start.
Terrain survey
Document surface, gradients, transitions and seasonal working conditions.
Load & stability
Confirm load centre, lift height, attachments and operating speed.
Transport & compliance
Check machine envelope, engine, emissions and destination documents.
05 / SEE THE WORK
Picture the
operating context.
These illustrative scenes help frame questions about load, route, space, surface, power and delivery. They do not replace model-specific suitability confirmation.
ZJ brand visualisations · The actual machine, facility, people and operating conditions may differ.
06 / PREPARE THE ORDER
From selected model
to confirmed supply.
The catalogue starts the conversation. The quotation should define the actual machine, selected options, documentation, packing and delivery plan.
01 / REVIEW
Application & configuration
Confirm load, lift, working space, power requirements and relevant options.
02 / VERIFY
Specification & checks
Review the agreed configuration and order-specific inspection items.
03 / PREPARE
Packing & delivery
Coordinate protection, documents and shipping arrangements around the destination.
Illustrative ZJ brand scenes. The actual preparation, inspection, packing and supplied equipment depend on the confirmed order.
Prepare a ZJ RT80 enquiryKeep exploring.
All productsRT SERIESDiesel
ZJ RT35
Catalogue referenceA 3.5-tonne all-wheel-drive rough-terrain forklift for uneven outdoor routes and material yards.
3.5 tRated capacity
3000-6000 mm customizableLift / fork range
Confirm with current technical sheetTurning radius
RT SERIESDiesel
ZJ RT40
Catalogue referenceA 4-tonne rough-terrain forklift combining all-wheel drive with elevated ground clearance.
4 tRated capacity
3000-7000 mm customizableLift / fork range
3500 mmTurning radius
RT SERIESDiesel
ZJ RT50
Catalogue referenceA 5-tonne all-wheel-drive model for heavier outdoor handling on irregular surfaces.
5 tRated capacity
2000-7000 mm customizableLift / fork range
3500 mmTurning radius
YOUR NEXT MOVE STARTS HERE
LET’S LIFT
YOUR AMBITION.
Tell us what you move. We’ll start with your requirements.
ZJ
FOR YOUR BUSINESS. FOR YOUR NEXT MOVE.WHATSAPP +86 181 0331 8125