Uneven routes
Map surface changes, gradients, mud, gravel and turning areas.
ZJ / RT SERIES
Catalogue-derived ZJ product visualisation. Final branding, engine, tyres, mast and terrain suitability are confirmed with the quotation.
ROUGH-TERRAIN FORKLIFTS
ZJ RT35
A 3.5-tonne all-wheel-drive rough-terrain forklift for uneven outdoor routes and material yards.
DieselCounterbalance
3.5 tRated capacity
3000-6000 mm customizableLift / fork range
Confirm with current technical sheetTurning radius
Speak directly with ZJ · +86 181 0331 8125
01 / MODEL IN CONTEXT
Start with
the work.
A 3.5-tonne all-wheel-drive rough-terrain forklift for uneven outdoor routes and material yards. Use the values below as a comparison starting point and confirm the final supplied configuration with ZJ.
Discuss ZJ RT35Outdoor loading
Confirm load centre, lift height, visibility and attachment needs.
Terrain package
Review tyres, ground clearance, drive mode and stability requirements.
Destination spec
Confirm engine, emissions and documentation for the market.
02 / CHECK THE FIT
CATALOGUE VALUES / CONFIRM WITH QUOTATIONSix numbers.
One operating picture.
Read rated capacity together with load centre, lift height, fork dimensions and the space needed to manoeuvre.
03 / FULL SPECIFICATION
Every detail.
A clearer decision.
Choose a specification group to review the catalogue values for ZJ RT35. Confirm the final supplied configuration with your quotation.
01
Capacity & dimensions
Size, load and manoeuvring data
| Rated capacity | 3500 kg |
|---|---|
| Maximum lift height | 3000-6000 mm customizable |
| Body width | Confirm for configuration |
| Wheelbase | 1990 mm |
| Turning radius | Confirm with current technical sheet |
| Minimum ground clearance | 280 mm centre clearance |
| Mast tilt (front / rear) | 6 / 12° |
02
Power & equipment
Drive, energy and operating configuration
| Power source | Diesel |
|---|---|
| Drive mode | Full-time all-wheel drive |
| Engine direction | 490 China III / 493 China IV direction |
| Gradeability | 35 % listed |
03
Source & verification
Catalogue identity and data traceability
| Original catalogue model | CPCD-35T |
|---|---|
| Catalogue reference | 2026 bilingual catalogue, page 18 |
Rated capacity depends on load centre, lift height and attachments. Engine, fuel system, emissions and destination requirements must be confirmed for the selected configuration.
MODEL GUIDE / ZJ RT35
A clearer 3.5 ton rough-terrain forklift
buying decision.
Use these model-specific checks to decide whether ZJ RT35 belongs on the shortlist. The final machine must still be matched to the real load, route and destination.
Read the load correctly
ZJ RT35 has a catalogue rated capacity of 3.5 t at a listed load centre of Confirm. Capacity at the required lift height must be reviewed with the actual load and attachment.
Measure the complete route
Compare the Confirm for configuration body width and Confirm with current technical sheet turning radius with the narrowest doorway, aisle and turning point on the route.
Confirm the operating system
Confirm the 490 China III / 493 China IV direction direction, emissions configuration, ventilation and documentation required for the destination market.
COMMON QUESTIONS
About ZJ RT35
Answers use the supplied catalogue values and identify where order-specific confirmation is still required.
Compare all rough-terrain forkliftsWhat is the rated capacity of ZJ RT35?
The supplied catalogue lists ZJ RT35 at 3.5 t, with a not listed in the supplied catalogue load centre. Actual available capacity must also be checked against lift height, attachment weight and the real load centre.
What lift height is listed for ZJ RT35?
The catalogue lists 3000-6000 mm customizable. Confirm the mast type, lowered mast height, free lift and residual capacity required for the actual application.
How much working space does ZJ RT35 need?
The listed body width is Confirm for configuration and the turning radius is Confirm with current technical sheet. Check these values with doors, aisles, right-angle stacking space and the complete travel route.
How do I request a quotation for this 3.5 ton rough-terrain forklift?
Send the maximum load and dimensions, load centre, lift height, workplace, shift hours, attachment needs, quantity and destination. ZJ will confirm the current ZJ RT35 configuration before quotation.
04 / BUILD YOUR WORKING PACKAGE
Configure the lift.
Send one clear enquiry.
Choose the duty, energy direction, mast, running gear and attachments. Your choices become a structured WhatsApp enquiry for ZJ to verify.
The configurator prepares an enquiry, not a final engineering approval. ZJ will confirm capacity, load centre, stability, attachment compatibility, local compliance and availability before quotation.
SELECTION GUIDE / CONFIGURE AROUND YOUR WORK
The machine is only the start.
Terrain survey
Document surface, gradients, transitions and seasonal working conditions.
Load & stability
Confirm load centre, lift height, attachments and operating speed.
Transport & compliance
Check machine envelope, engine, emissions and destination documents.
05 / SEE THE WORK
Picture the
operating context.
These illustrative scenes help frame questions about load, route, space, surface, power and delivery. They do not replace model-specific suitability confirmation.
ZJ brand visualisations · The actual machine, facility, people and operating conditions may differ.
06 / PREPARE THE ORDER
From selected model
to confirmed supply.
The catalogue starts the conversation. The quotation should define the actual machine, selected options, documentation, packing and delivery plan.
01 / REVIEW
Application & configuration
Confirm load, lift, working space, power requirements and relevant options.
02 / VERIFY
Specification & checks
Review the agreed configuration and order-specific inspection items.
03 / PREPARE
Packing & delivery
Coordinate protection, documents and shipping arrangements around the destination.
Illustrative ZJ brand scenes. The actual preparation, inspection, packing and supplied equipment depend on the confirmed order.
Prepare a ZJ RT35 enquiryKeep exploring.
All productsRT SERIESDiesel
ZJ RT40
Catalogue referenceA 4-tonne rough-terrain forklift combining all-wheel drive with elevated ground clearance.
4 tRated capacity
3000-7000 mm customizableLift / fork range
3500 mmTurning radius
RT SERIESDiesel
ZJ RT50
Catalogue referenceA 5-tonne all-wheel-drive model for heavier outdoor handling on irregular surfaces.
5 tRated capacity
2000-7000 mm customizableLift / fork range
3500 mmTurning radius
RT SERIESDiesel
ZJ RT70
Catalogue referenceA 7-tonne all-wheel-drive rough-terrain forklift for substantial loads and outdoor material movement.
7 tRated capacity
2000-7000 mm customizableLift / fork range
3900 mmTurning radius
YOUR NEXT MOVE STARTS HERE
LET’S LIFT
YOUR AMBITION.
Tell us what you move. We’ll start with your requirements.
ZJ
FOR YOUR BUSINESS. FOR YOUR NEXT MOVE.WHATSAPP +86 181 0331 8125