Warehouse transfer
Review load, lift and aisle dimensions for indoor material flow.
ZJ / E SERIES
ZJ branding visualisation. Final equipment and configuration may vary.
ELECTRIC FORKLIFTS
ZJ E25
A 2.5-tonne electric option with 7.5 kW drive and hydraulic pump motors.
ElectricCounterbalance
2.5 tRated capacity
3000 mmLift / fork range
2300 mmTurning radius
Speak directly with ZJ · +86 181 0331 8125
01 / MODEL IN CONTEXT
Start with
the work.
A 2.5-tonne electric option with 7.5 kW drive and hydraulic pump motors. Use the values below as a comparison starting point and confirm the final supplied configuration with ZJ.
Discuss ZJ E25Production support
Compare body size and turning radius around work areas.
Loading movement
Confirm surface, gradient and attachment requirements.
Shift planning
Match the battery and charging configuration to the operating pattern.
02 / CHECK THE FIT
CATALOGUE VALUES / CONFIRM WITH QUOTATIONSix numbers.
One operating picture.
Read rated capacity together with load centre, lift height, fork dimensions and the space needed to manoeuvre.
03 / FULL SPECIFICATION
Every detail.
A clearer decision.
Choose a specification group to review the catalogue values for ZJ E25. Confirm the final supplied configuration with your quotation.
01
Capacity & dimensions
Size, load and manoeuvring data
| Rated capacity | 2500 kg |
|---|---|
| Load centre | 500 mm |
| Maximum lift height | 3000 mm |
| Mast height (lowered) | 2100 mm |
| Maximum operating height | 4220 mm |
| Free lift | 80 mm, optional full-free-lift mast |
| Overhead guard height | 2100 mm |
| Body length (without forks) | 2200 mm |
| Length with forks | 3700 mm |
| Body width | 1100 / 1200 mm |
| Wheelbase | 1430 mm |
| Turning radius | 2300 mm |
| Minimum ground clearance | 100 mm |
| Fork length | 1220 mm |
| Mast tilt (front / rear) | 15° |
| Truck weight | 3200 kg |
02
Power & equipment
Drive, energy and operating configuration
| Power source | Electric |
|---|---|
| Operation | Seated / car-style |
| Drive motor | 7.5 kW |
| Hydraulic pump motor | 7.5 kW |
| Hydraulic system pressure | 15 MPa |
| Travel speed | 15 km/h unloaded / 14 km/h loaded |
| Lift speed | 200 / 250 mm/s loaded / unloaded |
| Gradeability | 15 / 20 % loaded / unloaded |
| Tyres | Solid tyres |
| Battery type | Lithium-ion or lead-acid |
| Battery voltage / capacity | 60 / 72 / 80 V × 70 Ah, customisable |
03
Source & verification
Catalogue identity and data traceability
| Original catalogue model | CPD-25 |
|---|---|
| Catalogue reference | 2026 bilingual catalogue, page 5 |
Rated capacity depends on load centre, lift height and attachments. Battery chemistry, battery capacity, charge time and operating duration are confirmed with the selected configuration.
MODEL GUIDE / ZJ E25
A clearer 2.5 ton electric forklift
buying decision.
Use these model-specific checks to decide whether ZJ E25 belongs on the shortlist. The final machine must still be matched to the real load, route and destination.
Read the load correctly
ZJ E25 has a catalogue rated capacity of 2.5 t at a listed load centre of 500 mm. Capacity at the required lift height must be reviewed with the actual load and attachment.
Measure the complete route
Compare the 1100 / 1200 mm body width and 2300 mm turning radius with the narrowest doorway, aisle and turning point on the route.
Confirm the operating system
Review the Lithium-ion or lead-acid and 60 / 72 / 80 V × 70 Ah, customisable direction together with shift length, charger supply and charging windows.
COMMON QUESTIONS
About ZJ E25
Answers use the supplied catalogue values and identify where order-specific confirmation is still required.
Compare all electric forkliftsWhat is the rated capacity of ZJ E25?
The supplied catalogue lists ZJ E25 at 2.5 t, with a 500 mm load centre. Actual available capacity must also be checked against lift height, attachment weight and the real load centre.
What lift height is listed for ZJ E25?
The catalogue lists 3000 mm. Confirm the mast type, lowered mast height, free lift and residual capacity required for the actual application.
How much working space does ZJ E25 need?
The listed body width is 1100 / 1200 mm and the turning radius is 2300 mm. Check these values with doors, aisles, right-angle stacking space and the complete travel route.
How do I request a quotation for this 2.5 ton electric forklift?
Send the maximum load and dimensions, load centre, lift height, workplace, shift hours, attachment needs, quantity and destination. ZJ will confirm the current ZJ E25 configuration before quotation.
MODEL POSITION / 2.5 TON ELECTRIC FORKLIFT
A mid-range electric shortlist between 2 and 3 tonnes.
Use this model-specific position to create a shortlist. It is not a substitute for the current technical sheet or configuration approval.
E25 is a 2,500 kg electric counterbalance direction with a listed 500 mm load centre, 3,000 mm lift height, 1,200 mm body width and 2,300 mm turning radius. It is a practical comparison point for palletised warehouse and production loads that exceed a 2-tonne brief.
Compare E25 with E20 for lighter duties and E30 when the verified maximum load or future operating margin points toward a 3-tonne class.
Confirm residual capacity at height, battery package, charger input, fork length, tyre choice and any attachment before quotation.
04 / BUILD YOUR WORKING PACKAGE
Configure the lift.
Send one clear enquiry.
Choose the duty, energy direction, mast, running gear and attachments. Your choices become a structured WhatsApp enquiry for ZJ to verify.
The configurator prepares an enquiry, not a final engineering approval. ZJ will confirm capacity, load centre, stability, attachment compatibility, local compliance and availability before quotation.
SELECTION GUIDE / CONFIGURE AROUND YOUR WORK
The machine is only the start.
Load & lift
Match maximum load and load centre to your required lift height and attachments.
Working space
Compare body dimensions and turning radius with your aisle, doorway and loading areas.
Battery & charging
Confirm battery chemistry, capacity, charger supply and your shift requirements with ZJ.
05 / SEE THE WORK
Picture the
operating context.
These illustrative scenes help frame questions about load, route, space, surface, power and delivery. They do not replace model-specific suitability confirmation.
ZJ brand visualisations · The actual machine, facility, people and operating conditions may differ.
06 / PREPARE THE ORDER
From selected model
to confirmed supply.
The catalogue starts the conversation. The quotation should define the actual machine, selected options, documentation, packing and delivery plan.
01 / REVIEW
Application & configuration
Confirm load, lift, working space, power requirements and relevant options.
02 / VERIFY
Specification & checks
Review the agreed configuration and order-specific inspection items.
03 / PREPARE
Packing & delivery
Coordinate protection, documents and shipping arrangements around the destination.
Illustrative ZJ brand scenes. The actual preparation, inspection, packing and supplied equipment depend on the confirmed order.
Prepare a ZJ E25 enquiryKeep exploring.
All productsE SERIESElectric
ZJ E20
Catalogue referenceTwo tonnes of rated capacity, paired with AC motor control and hydraulic power steering.
2 tRated capacity
3000 mmLift / fork range
2400 mmTurning radius
E SERIESElectric
ZJ E30
Catalogue referenceA versatile 3-tonne electric counterbalance forklift for the materials that move your business.
3 tRated capacity
3000 mmLift / fork range
2500 mmTurning radius
E SERIESElectric
ZJ E15
Catalogue referenceA 1.5-tonne electric forklift for businesses matching everyday loads to a smaller footprint.
1.5 tRated capacity
3000 mmLift / fork range
2250 mmTurning radius
YOUR NEXT MOVE STARTS HERE
LET’S LIFT
YOUR AMBITION.
Tell us what you move. We’ll start with your requirements.
ZJ
FOR YOUR BUSINESS. FOR YOUR NEXT MOVE.WHATSAPP +86 181 0331 8125