05 / PROCUREMENT GUIDE
Plan the shift.
Then plan the battery.
Battery and charger selection should be built around the operating pattern. Chemistry alone does not establish whether an electric forklift can support the required shift.
01 / DECISION POINTS
Four details.
One connected choice.
Review these points together before comparing models or accepting a configuration.
Energy demand
Load frequency, travel, gradients, attachments, temperature and shift length all influence practical energy use.
Battery direction
Lead-acid and lithium directions have different operating and charging considerations. Confirm availability for the selected model.
Charger match
Voltage, capacity, connector, supply phase and local electrical standards must match the battery and destination.
Charging routine
Define when, where and how the machine will charge, including ventilation, access, protection and operator procedure.
02 / BUYER METHOD
Turn the requirement
into evidence.
A structured brief reduces assumptions and makes technical and commercial comparisons easier to verify.
- 01
Record the shift
Document operating hours, breaks, peaks, number of shifts and time available for charging.
- 02
Check site power
Confirm voltage, phase, frequency, outlet, cable route and available electrical capacity.
- 03
Review the environment
Discuss cold storage, heat, dust, moisture and the proposed charging location.
- 04
Confirm the package
Request battery type, voltage, capacity, charger specification, connector and supplied documentation in writing.
03 / SEND WITH YOUR ENQUIRY
Six inputs
for a clearer answer.
Measurements, photos or drawings are useful where the load or route cannot be described precisely in words.
Prepare this enquiry- Hours and shifts per day
- Peak operating periods
- Average route and gradients
- Battery preference if any
- Site voltage, phase and frequency
- Charging area and environment
04 / PRACTICAL ANSWERS
Questions buyers
should ask early.
Can battery size be chosen from shift length alone?
No. Load frequency, travel, gradients, attachments, temperature and idle time also influence the required energy plan.
Does every electric forklift accept lithium batteries?
Not automatically. Confirm battery compatibility, control system, charger and available configuration for the selected model.
What electrical details should I provide?
Provide destination voltage, phase, frequency, outlet or connection plan and any site electrical restrictions.
Should the charger be listed in the quotation?
Yes. Ask for charger specification, compatibility, connector, input requirements and whether it is included in the supply scope.
YOUR NEXT MOVE STARTS HERE
LET’S LIFT
YOUR AMBITION.
Tell us what you move. We’ll start with your requirements.
ZJ